Help! Syphon with Module8 and intensity Extreme

Home Forums Syphon Syphon Implementations – User Help! Syphon with Module8 and intensity Extreme

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #58820
    Coignard
    Participant

    Hi,
    I have a conflict using the Syphon output of Module8 and the Blackmagic Intensity Extreme.
    I want to make a video projection of a live camera through Module8. I try to use the Black Syphon software but the result is that I saw a conflict between enter/output. I can use one or the other but not the two.
    I try to use the black magic Media Express software but it appears to be not usefull for my configuration.
    Is anybody can help me?
    Thank you
    Sorry for my bad english!!

    • This topic was modified 6 years ago by Coignard.
    #58828
    bangnoise
    Keymaster

    Is the hardware capable of simultaneous input and output? I’m not up to date with Blackmagic products, but I remember they never used to be.

    #58830
    vade
    Keymaster

    I don’t believe you can do both in and out simultaneously on that hardware.

    #58831
    Coignard
    Participant

    Thank you for following my problem
    Yes the hardware have an HDMI input and HDMI out
    Here a plan of the hardware

    Cordialy

    #58832
    bangnoise
    Keymaster

    Yes the hardware has input and output, but you cannot use them both at the same time, you must use input OR output.

    #58833
    Coignard
    Participant

    Here the intensity Extreme plan link
    https://www.blackmagicdesign.com/products/intensity/models

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.