v002 QC Kinect plugin

Home Forums v002 v002 QC Plugins Support v002 QC Kinect plugin

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #36520
    bagachi
    Participant

    Where is the file? All the download link appears in other forum doesn’t work.

    Thanks!

    #36532
    bangnoise
    Keymaster

    Thanks for the heads-up – not sure where that went. I’ve just put a release up at https://github.com/v002/v002-Open-Kinect/releases

    #39811
    zbr
    Participant

    hello, Thanks for putting up the release, seems to work out of the bat on 10.9 mavericks.

    The question I have though is that values seem severely cropped, I.e. kinect only sees depth values between roughly ~ 0.5m and ~ 1.0m, everything else just clamps to peak white

    Same unit used with Processing using SimpleOpenNI Version 1.96 gathers full depth range from ~ 0.5 m

    here’s what I’m getting using v002 kinect plugin

    bad input from kinect

    and here’s what I expect to see

    Kinect input into processing

    Am I doing something wrong? Thanks

    #39812
    zbr
    Participant

    I found this thread http://v002.info/forums/topic/v002-open-kinect-osx-mountain-lion/#post-6433 and as it happens I have AMD Radeon HD 6490M graphics card.

    Any chance to get a version that outputs 8 bit depth data?

    #39813
    zbr
    Participant

    ps. awesome work on the Tilt parameter, I spent few minutes just moving the kinect up and down to various positions. Kineme patch transfers depth just fine but doesn’t have that.

    #39841
    bangnoise
    Keymaster

    As you’ve discovered this is a known issue. I don’t think either of us have much time to spare right now, but it’s open source so…

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.